Deep Diamond Rubber Stair Tread

$55.12
SKU:
C1390216
Selected Color is
Black
Slate Gray
Light Gray
Adding to cart… The item has been added
Use Deep Diamond Rubber Stair treads to improve appearance, increase safety and durability, and minimize traffic noise in places with heavily travelled stairways. Ideal for universities & schools, hospitals, theatres, hotels, airports, restaurant…

Product Detail

Use Deep Diamond Rubber Stair treads to improve appearance, increase safety and durability, and minimize traffic noise in places with heavily travelled stairways. Ideal for universities & schools, hospitals, theatres, hotels, airports, restaurants, factories, and malls.

  • Diamond design provides excellent slip resistance while being easy to clean and aesthetically pleasing
  • Increases safety and reduces traffic noise
  • Meets safety regulations: Fed Specs. RR-T-650E and ZZ-T-001237 (GSA-FSS) & Flame Spread Rating of 75 or less using ASTM-E-84
  • Adjustable square nosing allows for a better fit on stairways
  • Made of long-wearing resilient homogeneous rubber
  • Available in Black, Light Gray and Slate Gray

The Deep Diamond Rubber Stair Tread is 1/4" thick, tapering to back edge, 12-1/4" deep. Treads have a 1-1/2" adjustable square nose; a sanded back to assure proper adhesion; contain no asbestos fiber; molded of top quality homogeneous rubber compound, color extending throughout thickness; free from objectionable odors, blisters, crack or imperfections which might impair serviceability.

The adjustable nose design will easily adjust and adhere to steps with return angle nosings between 90° and 60°, allows good fit on stairways designed for safety or aesthetics.

How to Apply

Where to Install

Install stair treads on any smooth dry interior step provided the shape of the step conforms to the underneath contour of the stair tread; particularly at the section where the flat part of the tread joins the nosing. A tight fit between stair treads and steps is essential.

Room Temperature

Materials, room and adhesives should be no less that 70°F 48 hours prior to, during and after installation.

Repairing Worn and Uneven Edges

Repair worn, uneven or misaligned edge of steps. It is essential that there is no space between the step and the stair tread when the installation is completed.

Preparation for Installation

Surfaces of steps must be level, clean, dry and free from oil, grease, rust, paint, varnish and old coverings, adhesives and any other foreign substance. Wooden steps should be thoroughly nailed down.

Worn or dished-out steps, cracks, holes, depression or any other irregularities on the step should be repaired by filling of sealing an smoothing with an underlayment compound, Quick Floor Curb and Step Repair.

Installation of Rubber Stair Treads

After the steps have been prepared and the stair treads cut and fitted, begin installation by spreading adhesive on the stair step completely covering the surface and the nosing.

When using contact adhesive, the adhesive should be spread on the bottom of the stair tread and completely underneath the nosing.

We suggest coating two steps and two treads at one time, then install the treads as described below. An alternate suggestion is to apply adhesive to every other step on a set of stairs, install these treads; go back and do the remainder.

Install Stair Treads

Set the stair tread into its proper position on the step, beginning at the nosing and pushing back firmly and as tightly as possible, holding up the back surface of the tread. After the nosing is completely in place, begin at the front and move back on the surface of the tread towards the riser, the tread should be pushing down firmly onto the step.

 

Use Deep Diamond Rubber Stair treads to improve appearance, increase safety and durability, and minimize traffic noise in places with heavily travelled stairways. Ideal for universities & schools, hospitals, theatres, hotels, airports, restaurants, factories, and malls.

  • Diamond design provides excellent slip resistance while being easy to clean and aesthetically pleasing
  • Increases safety and reduces traffic noise
  • Meets safety regulations: Fed Specs. RR-T-650E and ZZ-T-001237 (GSA-FSS) & Flame Spread Rating of 75 or less using ASTM-E-84
  • Adjustable square nosing allows for a better fit on stairways
  • Made of long-wearing resilient homogeneous rubber
  • Available in Black, Light Gray and Slate Gray

The Deep Diamond Rubber Stair Tread is 1/4" thick, tapering to back edge, 12-1/4" deep. Treads have a 1-1/2" adjustable square nose; a sanded back to assure proper adhesion; contain no asbestos fiber; molded of top quality homogeneous rubber compound, color extending throughout thickness; free from objectionable odors, blisters, crack or imperfections which might impair serviceability.

The adjustable nose design will easily adjust and adhere to steps with return angle nosings between 90° and 60°, allows good fit on stairways designed for safety or aesthetics.

Where to Install

Install stair treads on any smooth dry interior step provided the shape of the step conforms to the underneath contour of the stair tread; particularly at the section where the flat part of the tread joins the nosing. A tight fit between stair treads and steps is essential.

Room Temperature

Materials, room and adhesives should be no less that 70°F 48 hours prior to, during and after installation.

Repairing Worn and Uneven Edges

Repair worn, uneven or misaligned edge of steps. It is essential that there is no space between the step and the stair tread when the installation is completed.

Preparation for Installation

Surfaces of steps must be level, clean, dry and free from oil, grease, rust, paint, varnish and old coverings, adhesives and any other foreign substance. Wooden steps should be thoroughly nailed down.

Worn or dished-out steps, cracks, holes, depression or any other irregularities on the step should be repaired by filling of sealing an smoothing with an underlayment compound, Quick Floor Curb and Step Repair.

Installation of Rubber Stair Treads

After the steps have been prepared and the stair treads cut and fitted, begin installation by spreading adhesive on the stair step completely covering the surface and the nosing.

When using contact adhesive, the adhesive should be spread on the bottom of the stair tread and completely underneath the nosing.

We suggest coating two steps and two treads at one time, then install the treads as described below. An alternate suggestion is to apply adhesive to every other step on a set of stairs, install these treads; go back and do the remainder.

Install Stair Treads

Set the stair tread into its proper position on the step, beginning at the nosing and pushing back firmly and as tightly as possible, holding up the back surface of the tread. After the nosing is completely in place, begin at the front and move back on the surface of the tread towards the riser, the tread should be pushing down firmly onto the step.