Epoxicote High Build Anti-Slip

$202.88
SKU:
C10902171
Selected Color is
Black
Dark Gray
Navy Gray
Silver Gray
Tile Red
Safety Yellow
Mid Blue
Mid Green
Adding to cart… The item has been added
Epoxicote High Build Anti-Slip is our popular range of heavy-duty floor paint with added particles suspended in the coating, making it easy to use and leaves a uniform textured finish. It delivers an ultra-hard wearing chemical resistant, gloss floor…

Product Detail

Epoxicote High Build Anti-Slip is our popular range of heavy-duty floor paint with added particles suspended in the coating, making it easy to use and leaves a uniform textured finish. It delivers an ultra-hard wearing chemical resistant, gloss floor coating.

  • Gloss, textured finish
  • 100% solids epoxy resin formula
  • High-build application gives excellent wear resistance
  • Protects the concrete from oil and chemical contamination
  • Non-tainting and virtually solvent-free
  • Easy to clean surface
  • Resistant to oil, solvents and harsh cleaning chemicals
  • Coverage is approx. 190 sq ft per 1.05 gallon kit

We recommend Epoxicote High Build Rapid for jobs that need less down time and Epoxicote High Build Cold Cure for cold environment applications.

Warning: Cancer and Reproductive harm image

 

Specifications

Usage Interior/Exterior: Interior
Finish: Glossy, textured
Suitable for: Concrete, well bonded paint, wood, some metals
Primer Required: Yes, on bare concrete and very porous surfaces we recommend using 4 Hour Epoxy Primer
Recommended Number of Coats: One is usually sufficient
Pot Life: 25 minutes at 70°F
Curing Time (Hours): 16 hours at 70°F

How to Apply

Preparation: Concrete and Brick 
Concrete to be treated must be dry, at least four weeks old and free of any soft surface laitance, or contamination All loose material should be removed. Very smooth bare concrete or concrete with soft surface laitance should be etched with Watco Cemtetch and the area thoroughly hosed off and allowed to dry. Grease or oil should be removed with Watco Bio-D (or similar degreaser) and the area thoroughly hosed off and allowed to dry. Very smooth previously painted surface should preferably be abraded to improve adhesion.

Preparation: Steel
Remove loose or flaking material, rust and any previous coatings by wire brushing or disc grinding to achieve a bright surface. Grease or oil should be removed with Watco Bio-D and the metal then washed with water and allowed to dry. Coating should be carried out immediately providing flash rusting has not occurred.

Mixing
Each Epoxicote High Build kit consists of a container of curing agent and a container of resin. The curing agent and resin must be thoroughly mixed together with a paint mixer attached to an electric drill for 2 to 3 minutes until an even color is obtained. Do not mix more than one unit at a time.


Application
Epoxicote High Build: Best results are obtained in warm conditions (minimum 60°F). On horizontal surfaces apply by medium pile type roller (not foam) in one coat.

Data Sheet

Epoxicote High Build Anti-Slip is our popular range of heavy-duty floor paint with added particles suspended in the coating, making it easy to use and leaves a uniform textured finish. It delivers an ultra-hard wearing chemical resistant, gloss floor coating.

  • Gloss, textured finish
  • 100% solids epoxy resin formula
  • High-build application gives excellent wear resistance
  • Protects the concrete from oil and chemical contamination
  • Non-tainting and virtually solvent-free
  • Easy to clean surface
  • Resistant to oil, solvents and harsh cleaning chemicals
  • Coverage is approx. 190 sq ft per 1.05 gallon kit

We recommend Epoxicote High Build Rapid for jobs that need less down time and Epoxicote High Build Cold Cure for cold environment applications.

Warning: Cancer and Reproductive harm image

 

Usage Interior/Exterior: Interior
Finish: Glossy, textured
Suitable for: Concrete, well bonded paint, wood, some metals
Primer Required: Yes, on bare concrete and very porous surfaces we recommend using 4 Hour Epoxy Primer
Recommended Number of Coats: One is usually sufficient
Pot Life: 25 minutes at 70°F
Curing Time (Hours): 16 hours at 70°F

Preparation: Concrete and Brick 
Concrete to be treated must be dry, at least four weeks old and free of any soft surface laitance, or contamination All loose material should be removed. Very smooth bare concrete or concrete with soft surface laitance should be etched with Watco Cemtetch and the area thoroughly hosed off and allowed to dry. Grease or oil should be removed with Watco Bio-D (or similar degreaser) and the area thoroughly hosed off and allowed to dry. Very smooth previously painted surface should preferably be abraded to improve adhesion.

Preparation: Steel
Remove loose or flaking material, rust and any previous coatings by wire brushing or disc grinding to achieve a bright surface. Grease or oil should be removed with Watco Bio-D and the metal then washed with water and allowed to dry. Coating should be carried out immediately providing flash rusting has not occurred.

Mixing
Each Epoxicote High Build kit consists of a container of curing agent and a container of resin. The curing agent and resin must be thoroughly mixed together with a paint mixer attached to an electric drill for 2 to 3 minutes until an even color is obtained. Do not mix more than one unit at a time.


Application
Epoxicote High Build: Best results are obtained in warm conditions (minimum 60°F). On horizontal surfaces apply by medium pile type roller (not foam) in one coat.

Videos Hide Videos Show Videos