Concrex Vertical

$160.90
SKU:
A130048
Adding to cart… The item has been added
Concrex Vertical is specially designed to fix damaged concrete on vertical surfaces. Our super-tough formula contains lightweight fillers capable of handling even overhead repairs and will not slump during application. Ideal for frost-affected concre…

Product Detail

Concrex Vertical is specially designed to fix damaged concrete on vertical surfaces. Our super-tough formula contains lightweight fillers capable of handling even overhead repairs and will not slump during application. Ideal for frost-affected concrete with exposed reinforcement, Concrex Vertical stands up tough against the elements. This two-part epoxy resin mortar is suitable for concrete, stone, and metal.

  • Will not slump during application
  • Will not shatter under impact damage
  • Durable and impervious finish
  • Provides excellent chemical resistance
  • Apply at any depth without the need to build up layers
  • Tack Coat is recommended as a primer

Specifications

Suitable for: Sand & cement, concrete and metal
Usage Interior/Exterior: Interior or Exterior
Primer Required: Watco Tack Coat required before use
Coverage: Approx 18 sq. ft at 1/4" thick
Curing Time (Hours): 5-6 hours at 60-70°F and 10 hours at 50°F
Limitations: Concrex Vertical has excellent adhesion, chemical and weather resistance but due to the lightweight fillers used it will not have the same resistance to impact damage as Watco Concrex. Concrex Vertical however, will not shatter like

How to Apply

Surface Preparation
Surfaces should be clean, dry and free of all loose material. Wire brushing or sweeping is generally sufficient. Watco Bio D degreaser can be used to remove grease and oil. If the surface is damp, it can be primed with Watco Tack Coat.

Priming
A primer is not usually required if patch or crack repairing. Watco Tack Coat is recommended when applying Concrex as a thin section screed or when applying to smooth, non-porous or metal surfaces. Watco Tack Coat enables repairs to be made to damp areas. Watco Tack Coat is required before making repairs to vertical masonry with Concrex Vertical.

Mixing
Each pack of Concrex contains aggregate pre-blended with resin and the curing agent. If the entire pack of Concrex cannot be used within 30-60 minutes the products can be part mixed. To split a pack, carefully halve the aggregate/ resin mix (ideally divide it by weight) and use half the number of curing agent bottles or tins. Do not split the contents of a curing agent bottle or tin. Do not mix inside the plastic bucket. Wearing protective gloves, tip the aggregate on to a mixing tray or board. Shake the bottles or tins of curing agent thoroughly until the liquid is a uniform color. Form the aggregate into a mound and leave a small hole in the middle.

Empty the curing agent into the hole, ensuring the bottles or tins are completely drained. Carefully mix the aggregate with the curing agent using a trowel until a smooth mortar is obtained, this will take several minutes. The more thorough the mixing, the ‘wetter’, smoother and more manageable the mix becomes. Alternatively, you can knead the mixture by hand, but you must wear suitable gloves. It is important to mix thoroughly until you achieve a consistent color. Machinery such as a ‘Creteangle’ mixer or suitable open pan mixer can be used to ensure thorough mixing of large quantities.

Application
If appearance is critical we recommend the application of a small trial area first. Trowel firmly against the surface to be repaired, and finish with a trowel or float. To prevent ‘drag’ on the trowel, moisten a rag with mineral spirits and wipe it across the blade which will allow you to create a smooth finish. Concrex is normally applied in thicknesses of 0.5cm-5cm, but repairs can be feather-edged for a neat finish, as long as the majority of the repair is at least 0.5cm thick. For repairs deeper than 0.5cm, apply in separate layers (allow 6-8 hours between layers for curing) or use Watco Concrex Deep Fill (which can be applied 1.5cm-10cm thick in one layer). There is no need to reapply Watco Tack Coat if building up in layers.

Data Sheet

Concrex Vertical is specially designed to fix damaged concrete on vertical surfaces. Our super-tough formula contains lightweight fillers capable of handling even overhead repairs and will not slump during application. Ideal for frost-affected concrete with exposed reinforcement, Concrex Vertical stands up tough against the elements. This two-part epoxy resin mortar is suitable for concrete, stone, and metal.

  • Will not slump during application
  • Will not shatter under impact damage
  • Durable and impervious finish
  • Provides excellent chemical resistance
  • Apply at any depth without the need to build up layers
  • Tack Coat is recommended as a primer
Suitable for: Sand & cement, concrete and metal
Usage Interior/Exterior: Interior or Exterior
Primer Required: Watco Tack Coat required before use
Coverage: Approx 18 sq. ft at 1/4" thick
Curing Time (Hours): 5-6 hours at 60-70°F and 10 hours at 50°F
Limitations: Concrex Vertical has excellent adhesion, chemical and weather resistance but due to the lightweight fillers used it will not have the same resistance to impact damage as Watco Concrex. Concrex Vertical however, will not shatter like

Surface Preparation
Surfaces should be clean, dry and free of all loose material. Wire brushing or sweeping is generally sufficient. Watco Bio D degreaser can be used to remove grease and oil. If the surface is damp, it can be primed with Watco Tack Coat.

Priming
A primer is not usually required if patch or crack repairing. Watco Tack Coat is recommended when applying Concrex as a thin section screed or when applying to smooth, non-porous or metal surfaces. Watco Tack Coat enables repairs to be made to damp areas. Watco Tack Coat is required before making repairs to vertical masonry with Concrex Vertical.

Mixing
Each pack of Concrex contains aggregate pre-blended with resin and the curing agent. If the entire pack of Concrex cannot be used within 30-60 minutes the products can be part mixed. To split a pack, carefully halve the aggregate/ resin mix (ideally divide it by weight) and use half the number of curing agent bottles or tins. Do not split the contents of a curing agent bottle or tin. Do not mix inside the plastic bucket. Wearing protective gloves, tip the aggregate on to a mixing tray or board. Shake the bottles or tins of curing agent thoroughly until the liquid is a uniform color. Form the aggregate into a mound and leave a small hole in the middle.

Empty the curing agent into the hole, ensuring the bottles or tins are completely drained. Carefully mix the aggregate with the curing agent using a trowel until a smooth mortar is obtained, this will take several minutes. The more thorough the mixing, the ‘wetter’, smoother and more manageable the mix becomes. Alternatively, you can knead the mixture by hand, but you must wear suitable gloves. It is important to mix thoroughly until you achieve a consistent color. Machinery such as a ‘Creteangle’ mixer or suitable open pan mixer can be used to ensure thorough mixing of large quantities.

Application
If appearance is critical we recommend the application of a small trial area first. Trowel firmly against the surface to be repaired, and finish with a trowel or float. To prevent ‘drag’ on the trowel, moisten a rag with mineral spirits and wipe it across the blade which will allow you to create a smooth finish. Concrex is normally applied in thicknesses of 0.5cm-5cm, but repairs can be feather-edged for a neat finish, as long as the majority of the repair is at least 0.5cm thick. For repairs deeper than 0.5cm, apply in separate layers (allow 6-8 hours between layers for curing) or use Watco Concrex Deep Fill (which can be applied 1.5cm-10cm thick in one layer). There is no need to reapply Watco Tack Coat if building up in layers.