Bio D Floor Degreaser & Cleaner

$30.14
SKU:
F230013
Adding to cart… The item has been added
Bio-D is a high-performance, heavy duty biodegradable degreaser for floors and machinery that replaces traditional solvent-based products. It is specially formulated to remove oil and grease from concrete and other masonry type floors. Bio-D contains…

Product Detail

Bio-D is a high-performance, heavy duty biodegradable degreaser for floors and machinery that replaces traditional solvent-based products. It is specially formulated to remove oil and grease from concrete and other masonry type floors. Bio-D contains no solvents or other chemicals that are dangerous for the environment. Use Bio-D as a general floor cleaner on bare concrete or as a way to prep surfaces prior to a repair or coating application.

Features and Benefits of Bio-D- Concrete Floor Degreaser and Cleaner:

  • Simply apply with a broom and rinse away or mop up
  • Can be diluted and used as a general floor cleaner on bare concrete
  • Safe for use on most painted surfaces
  • Environmentally friendly emulsifying degreaser
  • Penetrates even the thickest deposits of impacted grease
  • Can also be used as a machine degreaser
  • Ideal for oil and grease impacted concrete floors, prepping floors for coating application
  • For use on interior and exterior applications
  • Low odor formula
  • Suitable for concrete and metal
  • Covers approximately 150 sq. ft. per 1.3 gallons

Specifications

Suitable for: Bare or painted concrete/asphalt and machinery
Usage Interior/Exterior: Interior and Exterior
Composition: Biodegradable cleaner
Coverage: Approximately 150 sq. ft. per 1.3 gallons
Number of Coats: 1

How to Apply

Mixing: Shake well before use.

Application: The floor must be dry before application. Brush in undiluted Bio-D Floor Degreaser & Cleaner with a stiff broom, allowing at least 15 minutes for penetration. A little water may be added to the floor at this stage to aid spreading. Too much will reduce the effectiveness of Bio-D. Then loosen deposits with a stiff broom or mechanical scrubber. Rinse with clean cold water preferably while continuing to scrub. If further applications are required, the floor should be reasonably dry before next application.

Machinery: Liberally coat oily and greasy parts with a soft brush. Leave on for 5-15 minutes according to the hardness of the oil, then rinse well with water. Make sure to cover and protect other surfaces that might become damaged or must not become wet.

Coverage: Varies widely according to conditions. Assume 150 sq. ft. per 1.3 gallons may be used as a guide when removing heavy contamination.

Data Sheet

Bio-D is a high-performance, heavy duty biodegradable degreaser for floors and machinery that replaces traditional solvent-based products. It is specially formulated to remove oil and grease from concrete and other masonry type floors. Bio-D contains no solvents or other chemicals that are dangerous for the environment. Use Bio-D as a general floor cleaner on bare concrete or as a way to prep surfaces prior to a repair or coating application.

Features and Benefits of Bio-D- Concrete Floor Degreaser and Cleaner:

  • Simply apply with a broom and rinse away or mop up
  • Can be diluted and used as a general floor cleaner on bare concrete
  • Safe for use on most painted surfaces
  • Environmentally friendly emulsifying degreaser
  • Penetrates even the thickest deposits of impacted grease
  • Can also be used as a machine degreaser
  • Ideal for oil and grease impacted concrete floors, prepping floors for coating application
  • For use on interior and exterior applications
  • Low odor formula
  • Suitable for concrete and metal
  • Covers approximately 150 sq. ft. per 1.3 gallons
Suitable for: Bare or painted concrete/asphalt and machinery
Usage Interior/Exterior: Interior and Exterior
Composition: Biodegradable cleaner
Coverage: Approximately 150 sq. ft. per 1.3 gallons
Number of Coats: 1

Mixing: Shake well before use.

Application: The floor must be dry before application. Brush in undiluted Bio-D Floor Degreaser & Cleaner with a stiff broom, allowing at least 15 minutes for penetration. A little water may be added to the floor at this stage to aid spreading. Too much will reduce the effectiveness of Bio-D. Then loosen deposits with a stiff broom or mechanical scrubber. Rinse with clean cold water preferably while continuing to scrub. If further applications are required, the floor should be reasonably dry before next application.

Machinery: Liberally coat oily and greasy parts with a soft brush. Leave on for 5-15 minutes according to the hardness of the oil, then rinse well with water. Make sure to cover and protect other surfaces that might become damaged or must not become wet.

Coverage: Varies widely according to conditions. Assume 150 sq. ft. per 1.3 gallons may be used as a guide when removing heavy contamination.