Basket (0)

Watco manufactures industrial strength floor paints, repair materials and non slip products


Try our new site



$79.55 From

Quality line marking made for cold and exterior surfaces. Using Watco’s brilliant, versatile polyaspartic resin technology, Toughline guarantees high quality, wear and tear resistant lines for those difficult cold, wet environments.

Safety Yellow White
Add Items to Cart

* Required Fields


There are no price breaks available.



Price Qty
Toughline Line Marking Paint
Paint Brush - 2"
$4.10  excl. tax
Paint Brush - 2"
$4.10  excl. tax
Toughline Line Marking Paint
Paint Brush - 4"
$7.85  excl. tax
Paint Brush - 4"
$7.85  excl. tax
$79.55 From
Product Details
Watco Toughline incorporates the latest polyaspartic resin technology for a high quality, highly wear resistant line marking paint that can be applied as low as 15°F. This makes it the perfect line marker for unheated warehouses, walk in fridges, cold stores and loading bays. It is particularly useful for exterior applications as it resists chalking, fading, weathering and UV discoloration.

  • Flexible
  • UV resistant
  • Can be applied between 15°F and 85°F
  • Takes heavy wear and tear
  • Excellent chemical resistance

  • Coverage:: Approximately 75m of a 50mm wide line per 1 liter, allowing for one coat.

    Curing times are dependent on site conditions, but the following can be used as a guide:
    Curing Times
    70°F40°F32°F -50°F
       Recoatable      4-5 hrs      10-12 hrs      16 hrs      30 hrs   
       Light Traffic      6-8 hrs      18 hrs      24 hrs      36 hrs   
       Heavy Traffic      12 hrs      24 hrs      36 hrs      48 hrs   

    Prop 65


    Quick Links

    Toughline Yellow
    Toughline White
    Technical Data Sheet
    Usage - Interior / Exterior Interior and Exterior
    Usage - Surfaces Concrete, asphalt and wood
    Max Operational Temp (deg F) 85°F
    Coverage (sqft per kit) 240 linear feet at 2" wide
    Application - Pot Life (hours) 25-30 minutes at 60°F
    Application - Recommended Coats 1
    How To Apply
    Surface Preparation
    All surfaces must be -10°C or above and free from ice or water. Concrete to be treated must be at least four weeks old, completely dry and free of contaminants. Grease or oil should be removed with Watco Bio-D (or a similar emulsifying degreasant) and the area thoroughly washed off and allowed to dry. Very smooth concrete or concrete with surface laitance (a weak dusty layer) should be abraded or etched with Watco Cemtetch to ensure adequate adhesion. The concrete should be thoroughly washed down and allowed to dry after treatment with Watco Cemtetch. Previously painted surfaces should be thoroughly abraded by sanding to improve adhesion and to remove any weak or loose material. A trial area is advisable to test compatibility with previous coatings. Below 40°F it may be necessary to avoid processes which involve wetting the floor due to the difficulty in drying. A good sweep or mechanical brushing may be sufficient. Do not apply outside if rainfall is imminent.

    Mix between 15°F and 75°F. Remove the two inner tins from the tall outer tin. Stir each tin thoroughly and pour all of the contents into the outer tin (scrape around the inside of the tins to remove any residue). Mix the components together thoroughly using a spatula or a similar wide bladed tool (a piece of wooden batten is ideal). Continue mixing until an even color and consistency are obtained. Do not mix more than one pack at a time. If a paint stirrer fitted to an electric drill is used, also use the spatula to blend in any unmixed material from the sides and bottom of the tin. Do not dilute. Pot life is 25-30 minutes at 60°F

    If appearance is critical we recommend the application of a small trial area first.

    Apply between 15°F and 85°F. The viscosity will be somewhat thicker at very low temperatures, reducing coverage a little.
    Request a Quote/Sample

    Home Delivery

    Shipping cost

    Over $1,250.00 FREE
    From $750.00 to $1,249.99 $52.00
    From $400.00 to $745.99 $40.50
    From $200.00 to $399.99 $33.50
    Up to $199.99 $19.50

    © 2017 Watco Industrial Flooring. All Rights Reserved.

    Terms & conditions |  Privacy policy |  Site map |  About us


    Problem Solving