Basket (0)

Watco manufactures industrial strength floor paints, repair materials and non slip products


Try our new site

Safety Coat Rapid Anti Slip Epoxy Floor Coating

Safety Coat Rapid Anti Slip Epoxy Floor Coating

$177.15 From

Watco Industrial Flooring’s Safety Coat Rapid is an anti slip epoxy floor coating that is effective for floors with heavy traffic. It’s a rapid-curing, fine-particle anti slip floor coating that works in one day. Shop now.

Blue Silver Gray Tile Red
Add Items to Cart

* Required Fields


There are no price breaks available.

$177.15 From
Product Details
Safety Coat Rapid is a uniquely formulated, anti slip epoxy floor coating that uses a special aggregate suspended in the liquid, allowing the coating to dry to an evenly textured, slip-resistant surface in a single day. It provides a more attractive and easier-to-clean finish than conventional “gritty” paint. It is suitable as an interior coating for concrete or wood and can be used on all potentially slippery, concrete floors in heavy wear areas.

Features and Benefits of Safety Coat Rapid - Anti Slip Epoxy Floor Coating:

  • Unique anti slip coating for heavy traffic floors, stairs, platforms, walkways or ramps
  • Contains fine, slip-resistant particles embedded in a tough epoxy resin coating
  • Extremely durable and chemical-resistant coating
  • Non-flammable, solvent-free and virtually odorless formula
  • Gives a professional looking finish
  • Curing time: recoat in 1-3 hours. Full cure overnight (approximately 6 hours at 60-70°F) to accept light foot traffic the next day.
  • Covers approximately 240 sq. ft. per kit
  • Easily applied by Roller, and Paint Brush to cut in the walls

    VOC < 100g/L Industrial manitenance coating suitable for exposure to chemical mixtures and solutions as well as repeated industrial cleaning.

    Quick Links

    Safety Data Sheet_Safety Coat Rapid_Navy Gray_C6404106
    Safety Data Sheet_Safety Coat Rapid_Silver Gray_C6405105
    Safety Data Sheet_Safety Coat Rapid_Tile Red_C6408107
    Safety Data Sheet_Safety Coat Rapid_Blue_C6409109
    Safety Data Sheet_Safety Coat Rapid_Green_C641108
    Technical Data Sheet
  • Specifications
    Appearance fine aggregate textured, matte to low sheen finish
    Delivery Time (Days) Ships in 24 hours, delivers in 1-3 days nationwide
    Primer Required no, can use Powerfloat Primer or 4-Hour Epoxy Primer
    Usage - Interior / Exterior interior
    Usage - Suitable for repair, new use
    Usage - Properties rapid set, fine traction-enhancing particles, anti slip epoxy resin floor coating, easily applied, extremely durable, chemical resistant, non-flammable, solvent free, virtually odorless
    Usage - Surfaces floors. VOC < 100g/L Industrial manitenance coating suitable for exposure to chemical mixtures and solutions as well as repeated industrial cleaning.
    Coverage (sqft per kit) 240 sq. ft. per 1 gal. kit
    Application - Curing Time (hours) re-coat: 1-3 hr.; full cure overnight (approx. 6 hr. @ 60-70°F) to accept light foot traffic the next day
    Application - Recommended Coats 2
    Max Application Temperature (deg F) 90
    Application - Application Condition clean & dry
    Min Application Temperature (deg F) 60
    How To Apply
    SURFACE PREPARATION: The concrete surface must be clean, dry and free of loose material. New concrete should be allowed to cure for 28 days prior to coating. Remove oil, dirt, grease and other chemical contaminants by cleaning with detergent or other suitable cleaner. Rinse thoroughly. Use Cemtetch™ to remove unsound laitance and create a proper surface profile to the concrete. Rinse thoroughly and allow to dry before application of the Safety Coat Rapid. Previously coated floors need to be in good sound condition with proper adhesion to the concrete substrate. Glossy finishes should be sanded to provide a surface profile. Wooden surfaces should also be sanded. Two or three coats may be required on open textured surfaces such as chipboard. Not recommended for use onto metal or latex leveling compounds.
    MIXING: Combine the base and activator components into a clean 2 gallon or 5 gallon plastic or metal pail. Use a paint paddle or spatula to scrape out and transfer as much of the material as possible. Mix the components thoroughly until an even, uniform color is achieved. If using a power mixer use a paint paddle or spatula to blend in any unmixed material from the sides and bottom of the pail. Do not mix more than one unit at a time. Immediately pour the material into a roller pan and do not delay application. The pot life is approximately two hours at 60-70°F. Higher temperatures will reduce the pot life.

    APPLICATION: Apply in a well ventilated area when the air and surface temperatures are between 70-90°F. The air and surface temperature must be at least 60°F prior to application. Use a good quality lint free 3/8" nap roller with a phenolic core. The first coat of Safety Coat Rapid will act as a priming/sealing coat on most surfaces. The second coat should be applied as soon as the first coat is dry (approximately 1-3 hours at 60-70°F). Do not exceed the maximum coverage of 240 sq. ft. per kit. Occasional stirring of the product will ensure a more even distribution of the aggregate. In exceptional temperature conditions, please contact a Watco Industrial Flooring Expert at (855) 627-6350.
    CURING TIME: Safety Coat Rapid can be re-coated in 1-3 hours. Full cure overnight (approximately 6 hours at 60-70°F) to accept light foot traffic the next day. The curing time will be extended by low temperatures. Full chemical resistance is achieved over seven days (at a minimum constant temperature of 60°F). Avoid washing the surface for seven days.
    COVERAGE:One gallon will cover approximately 240 sq. ft. per kit. Two coats applied by roller are normally required. Brush application will not be as effective and will also result in reduced coverage.
    CLEAN UP: Rollers should be cleaned with warm soapy water before the product has cured. Where large areas are being coated, care should be taken to ensure that there is no build-up of partly cured resin on the roller.
    Request a Quote/Sample

    Home Delivery

    Shipping cost

    Over $1,250.00 FREE
    From $750.00 to $1,249.99 $52.00
    From $400.00 to $745.99 $40.50
    From $200.00 to $399.99 $33.50
    Up to $199.99 $19.50

    You might also need...

    © 2017 Watco Industrial Flooring. All Rights Reserved.

    Terms & conditions |  Privacy policy |  Site map |  About us


    Problem Solving