Basket (0)

Watco manufactures industrial strength floor paints, repair materials and non slip products

 

Try our new site

Safety Coat Plus® Cold Cure

Safety Coat Plus® Cold Cure

$174.30 From

A coarse textured, slip resistant epoxy floor coating that can be applied at temperatures as low as 32°F. The ideal anti slip epoxy coating for interior and exterior, wet, oily and low temperature areas.

Black Safety Red Safety Yellow Silver Gray Tile Red
Add Items to Cart

* Required Fields

VIEW PRICE BREAKS

There are no price breaks available.

$174.30 From
 
Product Details
Safety Coat Plus® Cold Cure is a low temperature anti slip floor coating that can be applied in cold conditions as low as 32°F. It is designed to provide slip resistance in areas of severe hazard even when cold, wet or oily. Safety Coat Plus has excellent adhesion to concrete, stone, wood and metal. It provides resistance to harsh chemicals and mechanical scrubbing. Our unique formulation gives you an evenly textured, non slip epoxy floor coating that's more reliable, attractive and easier to clean than conventional "gritty" paint.

Features and Benefits of Safety Coat Plus® Cold Cure – Non Slip Epoxy Floor Coating:


  • Can be applied in temperatures as low as 32°F
  • Suitable for walk-in refrigerators, freezers, cold stores, loading bays, ramps, platforms and more
  • Heavy duty, non slip flooring system for dangerous interior & exterior areas
  • Contains traction-enhancing particles embedded in a tough epoxy resin coating
  • Withstands constant foot and wheeled traffic
  • Kit covers approximately 50 sq. ft.; one coat covers most
  • Cures in approximately 24 hr. @ 50°F, 48 hr. @ 32°F
  • Easily applied by Roller, and Paint Brush to cut in the walls
  • Extremely durable and chemical-resistant
  • Non-flammable, virtually solvent-free & virtually odorless formula

  • Safety Coat Plus Cold Cure is resistant to a wide range of acids and alkalis (at 77°F) including:
  • Paraffin
  • Fuel oils
  • 10% nitric, sulfuric and hydrochloric acids
  • Sugar solutions
  • Oxalic acid
  • Citric acid
  • Salt solutions
  • Caustic soda
  • Hypochlorite solutions
  • Petrol alcohols


    Prop 65


    Safety Coat Plus Cold Cure

    Quick Links

    Safety Data Sheet_Safety Coat Plus Cold Cure_Black_C6702103
    Safety Data Sheet_Safety Coat Plus Cold Cure_Navy Gray_C6704101
    Safety Data Sheet_Safety Coat Plus Cold Cure_Silver Gray_C6705100
    Safety Data Sheet_Safety Coat Plus Cold Cure_Tile Red_C6708102
    Safety Data Sheet_Safety Coat Plus Cold Cure_Safety Yellow_C6715104
    Technical Data Sheet
  • Specifications
    Appearance matte coarse anti slip finish
    Delivery Time (Days) Ships in 24 hours, delivers in 1-3 days nationwide
    Primer Required no
    Usage - Interior / Exterior interior & exterior
    Usage - Suitable for concrete, stone, wood & flat steek
    Usage - Properties heavy duty, coarse anti slip flooring system for dangerous areas, provides extra traction in slippery areas, even when wet or oily, withstands constant foot and wheeled traffic, chemical resistant, solvent-free
    Usage - Surfaces walk in refrigerators & freezers, cold stores, loading bays, garages, etc.
    Coverage (sqft per kit) approximately 50 sq. ft. per kit
    Application - Curing Time (hours) approximately 24 hr. @ 50°F or approximately 48 hr. @ 32°F
    Application - Pot Life (hours) approximately 30 min. @ 70°F
    Application - Recommended Coats one coat will cover most surfaces
    Max Application Temperature (deg F) 50
    Application - Application Condition dry, well ventilated area
    Min Application Temperature (deg F) 32
    How To Apply
    SURFACE PREPARATION: The concrete surface must be clean, dry and free of loose material. New concrete should be allowed to cure for 28 days prior to coating. Remove oil, dirt, grease and other chemical contaminants by cleaning with detergent or other suitable cleaner. Rinse thoroughly. Use Cemtetch® to remove unsound laitance and create a proper surface profile to the concrete. Rinse thoroughly and allow to dry before application of Safety Coat Plus. Note: Concrete that has a sealer or curing agent on it may not respond to the Cemtetch treatment. It may be necessary to remove the sealer and create a surface profile by a mechanical method.
    Mixing: Store all materials of the kit at a temperature of 60-85°F for at least 8 hours prior to use. Combine the base and activator components into a clean 2 gallon or 5 gallon plastic or metal pail. Use a paint paddle or spatula to scrape out and transfer as much of the material as possible. Mix the components thoroughly until an even, uniform color is achieved. If using a power mixer use a paint paddle or spatula to blend in any unmixed material from the sides and bottom of the pail. Do not mix in the anti-slip aggregate. Do not mix more than one unit at a time. Immediately pour the material into a roller pan and do not delay application. The working time is 30 minutes @ 70°F, less at higher ambient temperatures, and unused material will get hot and may pose a hazard. Pot life of the mixed components left in the mixing container is 5-10 minutes.
    Curing Time: Curing time is affected by air and ground temperature. Safety Coat Plus Cold Cure takes approximately 24 hrs at 50°F, and approximately 48 hrs at 32°F. Be sure the product is fully cured before putting the area back into service.
    Coverage: Up to 50 sq ft per kit.
    APPLICATION: Apply in a well ventilated area when the air and surface temperatures are between 32-50ºF. Use a good quality lint free 3/8” nap roller with a phenolic core. A brush may be used for cutting in along walls. Roll out a workable section, then immediately broadcast the anti-slip aggregate uniformly over the wet coating to obtain the desired surface finish (full or light coverage). Using the same roller, re-roll over the section to help anchor the aggregate. Continue with the same procedure until the entire floor area to be coated is completed. Remember, the working time is approximately 30 minutes, so application should not be delayed. Protect the coating from water (including excessive condensation) until the surface has been allowed to cure for the times stated above. Early water contact while the coating is curing can reduce the gloss of the finish. Full chemical resistance will be gradually achieved over 7 days. Do not wash the surface with cleaning solution or water within this period. In common with all epoxy resin coatings, some color fading can occur when exposed to direct sunlight. Do not steam clean.
    Case Studies
    Reviews
    Request a Quote/Sample
    Delivery

    Home Delivery

    Shipping cost

    Over $1,250.00 FREE
    From $750.00 to $1,249.99 $52.00
    From $400.00 to $745.99 $40.50
    From $200.00 to $399.99 $33.50
    Up to $199.99 $19.50

    You might also need...

    © 2017 Watco Industrial Flooring. All Rights Reserved.



    Terms & conditions |  Privacy policy |  Site map |  About us

            


    Problem Solving