Basket (0)

Watco manufactures industrial strength floor paints, repair materials and non slip products

Safety Coat Cold Cure

Safety Coat Cold Cure

$185.60 From

Takes freezing conditions in its stride. The ideal flooring solution for when temperatures are extreme.

Black Mid Blue Mid Green Silver Gray Tile Red White Yellow
Add Items to Cart

* Required Fields

VIEW PRICE BREAKS

There are no price breaks available.

$185.60 From
 
Product Details
  • Takes heavy wear and tear and has excellent chemical resistance
  • New formulation based on the latest polyaspartic technology
  • Fast curing
  • Very good resistance to UV and chalking
  • Pre-blended aggregate for easy application

    Watco Safety Coat Cold Cure is an advanced new formula which allows floors to be coated as low as 15°F. It is ideal for refurbishment and maintenance in unheated areas during the winter months, when conventional coatings will not set. Its exceptional resistance to UV also makes it ideal for exterior applications

    Coverage: approx 250ft² per coat per pack onto a non-porous surface. Coverage will also be reduced if applying in temperatures below 32°C.

    Pendulum Slip Test Values
    Dry PTVWet PTV
     65 Low slip potential  45 Low slip potential 



    Prop 65


    Concrex Advanced

    Quick Links

    Technical Data Sheet
    Black Safety Data Sheet
    Silver Gray Safety Data Sheet
    Mid Blue Safety Data Sheet
    Mid Green Safety Data Sheet
    Navy Gray Safety Data Sheet
    Tile Red Safety Data Sheet
    White Safety Data Sheet
    Yellow Safety Data Sheet


    Application Video

  • Specifications
    Appearance Mid gloss with light texture
    Delivery Time (Days) Ships in 24 hours, delivers in 1-3 days
    Primer Required no
    Usage - Interior / Exterior interior or exterior
    Usage - Suitable for walk in fridges and freezers, cold stores, loading bays, garages and exterior areas
    Usage - Properties fine traction-enhancing particles, anti-slip epoxy resin floor coating, easily applied, extremely durable, chemical-resistant, non-flammable, solvent-free, virtually odourless formula, approved with under floor heating systems
    Usage - Surfaces concrete, sand and cement, painted surfaces
    Coverage (sqft per kit) 10
    Application - Curing Time (hours) ready for foot traffic in 5 hours at 5°C, 8 hours at 0°C
    Application - Pot Life (hours) 1 at 5°C
    Application - Recommended Coats 2
    How To Apply
    Surface Preparation
    All surfaces must be 15°F or above and free from ice or water. Concrete to be treated must be at least four weeks old, completely dry and free of contaminants. Grease or oil should be removed with Watco Bio-D and the area thoroughly washed off and allowed to dry.Very smooth concrete or concrete with surface laitance (a weak dusty layer) should be mechanically abraded or etched with Watco Cemtetch to ensure adequate adhesion. The concrete should be thoroughly washed down and allowed to dry after treatment. Watco Powerfloat Primer is an alternative preparation if wetting the floor or using Watco Cemtetch is an issue. The temperature will need to be 15°F or above for this application. Previously painted surfaces should be thoroughly abraded by sanding to improve adhesion and to remove any weak or loose material. A trial area is advisable to test compatibility with previous coatings. Do not apply outside if rainfall or snow are imminent.


    Mixing
    Mix between 15°F and 50°F. Remove the two inner tins from the tall outer tin. Stir each tin thoroughly and pour all of the contents into the outer tin (scrape around the inside of the tins to remove any residue). Mix the components together thoroughly using a spatula or a similar wide bladed tool (a wooden stir stick is ideal). Continue mixing until an even color and consistency are obtained. Do not mix more than one pack at a time. If a paint stirrer fitted to an electric drill is used, use the spatula to blend in any unmixed material from the sides and bottom of the tin. Do not dilute.

    Pot Life
    25 - 30 minutes at 50°C

    Application
    Apply between 15°F and 50°F. The viscosity will be somewhat thicker at very low temperatures.
    Reviews
    Request a Quote/Sample
    Delivery

    Home Delivery

    Shipping cost

    Over $1,250.00 FREE
    From $750.00 to $1,249.99 $52.00
    From $400.00 to $745.99 $40.50
    From $200.00 to $399.99 $33.50
    Up to $199.99 $19.50

    © 2017 Watco Industrial Flooring. All Rights Reserved.



    Terms & conditions |  Privacy policy |  Site map |  About us

            


    Problem Solving