NEW
You're viewing our new website experience.
Tell us what you think
search
0

$0.00

.

Clear Coat Plus Epoxy Floor Coating

An exceptionally hard wearing two-component polyaspartic mid-gloss concrete clear coat for indoors and out.



Qty
remove add


Close

Request a Sample


If you know which product you need, please enter the product name and quantity. If you would like us to help you decide, please give a brief description of the space along with area size and whether internal or external.


Message is Required
First Name required
Last Name required
Email Address required
Address 1 is required
City is required
Zip Code is required
Country is required

The information you have provided us will help us deliver information you regarding our products and services. By checking this box indicates that you have read and agreed to our terms of use and privacy policy. Please read these terms to understand how we protect and manage your data.

Close

Request a Quote


Please enter the details of your quote request below, and we'll come back to you as soon as we can with your prices.


Message is Required
First Name required
Last Name required
Email Address required
Address 1 is required
City is required
Zip Code is required
Country is required

The information you have provided us will help us deliver information you regarding our products and services. By checking this box indicates that you have read and agreed to our terms of use and privacy policy. Please read these terms to understand how we protect and manage your data.

Product Details remove

Clear Coat Plus is an exceptionally tough two-component clear floor coating for protecting bare concrete or revitalizing floors that have already been coated in the past. It cures to a mid-gloss finish to enhance the look of your premises. Use in a multitude of areas ranging from warehouses and showrooms to walk-in fridges and exterior car parking areas. Externally it will resist chalking, fading, feathering and has exceptional resistance to UV. Protect your property by giving it a clear coat floor.

Features and Benefits of Clear Coat Plus – Heavy Duty Floor Coating:

  • Protects colored & decorative coatings from heavy wear & tear
  • Low odor, low VOC
  • Can be used as a concrete floor sealer or clear coating
  • Easy roll-on application
  • Can be applied from 15 to 85°F
  • Excellent chemical resistance & durability
  • Suitable for internal & external use
  • Bare concrete: approximately 180sq. ft. per Liter
  • Coated surface: approximately 300sq. ft. per Liter
  • Cures in 6 to 8 hours for light foot traffic
  • Use with Vinyl Color Floor Chips to create a decorative floor finish
  • Tools: 18” Roller, or 4" Paint Brush

For added safety indoors and out we have an Anti Slip version available - Anti Slip Clear Coat Plus is an exceptionally hard wearing two-component clear coating for protecting bare concrete or refreshing previously coated concrete floors. It cures to a mid-gloss finish to enhance the look of your premises. Use in a multitude of areas ranging from warehouses and showrooms to walk-in fridges and exterior car parking areas. Externally it will resist chalking, fading, feathering and has exceptional resistance to UV. 


VOC < 100g/L Industrial maintenance coating suitable for exposure to chemical mixtures and solutions as well as repeated industrial cleaning.

Products You Maybe Interested In remove

Clear Coat Epoxy Floor Coating Details
Application of powerfloat primer Powerfloat Primer Details
Watco Powerfloat Sealer 5L Tin Powerfloat Sealer Details
Concrete Binder & Hardener Details
Concrete sealer is great for warehouses and production areas, it seals and tints the floor at the same time Concrete Sealer Water-based Details
QuickFloor® Rust Inhibiting Metal Primer Spray Details

Specifications add

Appearance Gloss Finish
Primer Required No
Usage Interior / Exterior Interior & Exterior
Suitable For Bare & previously coated concrete
Properties Easy to apply, two component clear coat, protects bare concrete, refreshes previously coated floors, durable, chemical resistant, virtually odorless
Surfaces Floors. VOC < 100g/L Industrial manitenance coating suitable for exposure to chemical mixtures and solutions as well as repeated industrial cleaning.
Coverage Bare concrete: approximately 250 sq. ft./gal.; coated surface: approximately 490 sq. ft./gal.
Pot Life 25 to 30 min. @ 70º F
Curing Time (hours) Light foot traffic: 6-8 hr; normal service: 24-48 hr; vehicle traffic: 72-96 hr; re-coat: 4-5 hr; not exceeding 48 hr
Recommended Coats One coat will cover most surfaces

How to Apply add

Surface Preparation
The concrete surface must be clean, dry and free of loose material. New concrete should be allowed to cure for 28 days prior to coating. Remove oil, dirt, grease and other chemical contaminants by cleaning with detergent or other suitable cleaner. Rinse thoroughly. Use Cemtetch® to remove unsound laitance and create a proper surface profile to the concrete. Rinse thoroughly and allow to dry before application of the Clear Coat Plus. Note: Concrete floors on grade must be free of moisture transmission from the ground. If there is any doubt about the dryness of the concrete, conduct a test by simply taping a piece of 4 mil plastic sheet 18” by 18” on the bare concrete for 24 hours. Be sure to tape all four sides. After 24 hours, check the concrete for signs of moisture. The concrete will be darker if damp. If moisture is found, allow additional drying time (10-14 days) and repeat test. Persistent moisture transmission will prevent proper performance of the coating, please contact a Watco Industrial Flooring Expert at (855) 627-6350 for assistance. Also, check for curing compound or other types of sealers by pouring a small amount of water onto the concrete. If water soaks in, the surface is suitable for coating. If water beads up on the concrete, the surface is not porous and a test application is warranted to ensure proper adhesion will develop. Sanding or mechanical abrading may be required if proper adhesion does not develop. Previously coated floors need to be in good sound condition with proper adhesion to the concrete substrate. Check the adhesion of the previous coating by cutting a small X in the coating using a sharp razor knife, firmly apply a piece of 2” duct tape over the center of the X cut, then pull off with a fast snap. The coating is suitable to topcoat if no significant previous coating is removed beyond the X cut. If the coating fails this test, then additional surface preparation is required. It is recommended previously coated floors be sanded and vacuumed prior to application of the Clear Coat Plus.

Mixing
Mix material when air temperature is between 50-77ºF (10-25ºC). Combine the base and activator by power mixing. Mix at 500-750 rpm for 1-3 minutes. Do not over mix or use higher speeds. This can introduce air into the coating causing small bubbles in the finish. It is very important to transfer as much activator as possible, scrape the sides and bottom of the container thoroughly. Mix the two components together for 1-3 minutes being careful to not pull air into the mixture. Once mixed, do not delay coating application as the pot life is only 25-30 minutes at 70ºF. NOTE: Do not scrape the sides or bottom of the mixed container. Use only the material that flows naturally out of the container. Doing so may result with un-activated material from the side wall of the container being applied. This will cause soft spots in the coating.

Application
Be sure the floor is clean, dry, and dust free. If needed, vacuum to remove dust and debris. Apply only when air, material and floor temperatures are between 15-85°F (-10.5-29°C). Use a good quality phenolic core roller with a 3/8” lint-free nap. Do not excessively over roll and make all final passes in the same direction. For best results, maintain a wet edge and end application at natural breaks in the floor like control joints or expansion joints. Do not apply in excess, avoid a heavy wet film. Use in well ventilated areas.

Curing Time 
Light foot traffic: 6-8 hours. Normal service: 24-48 hours. Vehicle traffic: 72-96 hours. Recoat: 4-5 hours, do not exceed 48 hours.

Coverage
Bare concrete: Approximately 250 sq.ft./gal. (6.2 m2/l). Coated surface: Approximately 490 sq. ft./gal. (12.1 m2/l).

Clean-Up
Clean up equipment with Xylene.

Associations, Awards & Standards


Legal Policy | Privacy Policy | Cookie Policy
© 2018 Watco Industrial Flooring. All Rights Reserved.