Basket (0)

Watco manufactures industrial strength floor paints, repair materials and non slip products

Safety Tape Primer – Adhesive Primer

Safety Tape Primer – Adhesive Primer

$17.00 From

Our adhesive primer helps provide better adhesion on poor surfaces prior to applying non slip safety tape and/or stair treads.

Add Items to Cart

* Required Fields

VIEW PRICE BREAKS

There are no price breaks available.

$17.00 From
 
Product Details
Safety Tape Primer will improve adhesion on dusty, porous or gritty surfaces. Apply just one coat by brush and allow to dry (for about 1 hour) before applying non slip safety tape or stair treads. Not required on smooth, non porous surfaces such as paint, varnish, tiles etc. Do not apply to metal.

Features and Benefits of Safety Tape Primer - Adhesive Primer:


  • Gives better adhesion on poor surfaces
  • Covers approximately 20 to 30 sq. ft. per 34 fl. oz.

    A pint of primer is sufficient for the following:
  • 6 - Safety Tape 2 x 60 ft. rolls
  • 30 - Self Adhesive Slip Free Treads 6" x 24 foot
  • 2 units are required for the 2 ft. x 60 ft. Slip Free Roll

    Quick Links

    Safety Data Sheet_Safety Tape Primer_34 fl. Oz._C440082
    Safety Data Sheet_Safety Tape Primer_1 pint_C440090
    Technical Data Sheet
  • Specifications
    Delivery Time (Days) Standard
    Usage - Interior / Exterior interior & exterior
    Usage - Suitable for concrete & wood
    Usage - Properties creates better adhesion for self adhesive products like anti slip tapes or slip free stair treads on dusty/porous or gritty surfaces
    Usage - Surfaces floors, ramps, docks, steps
    Coverage (sqft per kit) 1 pint: 6 - safety tape rolls 2" x 60 ft., 30 - slip free stair treads 6" x 24"
    Application - Curing Time (hours) 1 hour at 50 to 60°F
    Application - Recommended Coats 1
    Max Application Temperature (deg F) 90
    Min Application Temperature (deg F) 50
    How To Apply

    Safety Tape Primer will improve adhesion on dusty, friable surfaces. Not required on smooth, non porous surfaces such as paint, varnish, tiles etc. Do not apply to metal.

    Application: After stirring, apply one coat of primer by brush at a coverage rate of approximately 2-3m2 per 500ml. Allow to dry (the product is milky when applied, then turns clear upon drying). Dries in 1 hour at 50-60°F. Only apply the primer to the area that will be covered by the tape or tread. Uncovered primer could remain tacky and attract dirt. Apply the Safety Tape or Slip Free products according to the instructions.

    Limitations: Do not apply in wet conditions or at temperatures below 50°F
    Reviews
    Request a Quote/Sample
    Delivery

    Home Delivery

    Shipping cost

    Over $1,250.00 FREE
    From $750.00 to $1,249.99 $52.00
    From $400.00 to $745.99 $40.50
    From $200.00 to $399.99 $33.50
    Up to $199.99 $19.50

    © 2017 Watco Industrial Flooring. All Rights Reserved.



    Terms & conditions |  Privacy policy |  Site map |  About us

            


    Problem Solving