Basket (0)

Watco manufactures industrial strength floor paints, repair materials and non slip products

 

Try our new site

Epoxicote High Build

Epoxicote High Build

$161.70 From

100% solids epoxy for heavy traffic areas that require an extremely tough and durable coating with excellent chemical resistance.

Black Mid Blue Mid Green Safety Yellow Silver Gray Tile Red
Add Items to Cart

* Required Fields

VIEW PRICE BREAKS

There are no price breaks available.

$161.70 From
 
Product Details
  • Gloss finish
  • High-build application gives excellent wear resistance
  • Protects the concrete from oil and chemical contamination
  • Non-tainting and virtually solvent-free
  • Easy to clean surface

  • Resistant to: Oil, solvents and harsh cleaning chemicals

    Coverage: Approx. 190-215 sq ft per 1.05 gallon kit per coat depending on how porous concrete is


    Prop 65


    Epoxicote High Build

    Quick Links

    Technical Data Sheet
    Epoxicote High Build Black Safety Data Sheet
    Epoxicote High Build Dark Gray Safety Data Sheet
    Epoxicote High Build Silver Gray Safety Data Sheet
    Epoxicote High Build Mid Blue Safety Data Sheet
    Epoxicote High Build Mid Green Safety Data Sheet
    Epoxicote High Build Navy Gray Safety Data Sheet
    Epoxicote High Build Safety Yellow Safety Data Sheet
    Epoxicote High Build Tile Red Safety Data Sheet

    Epoxicote High Build Booklet

    Application Video

    Specifications
    Delivery Time (Days) Ships in 24 hours, delivers in 1-3 days
    Primer Required very porous surfaces should be primed with Watco 4-Hour Epoxy Primer
    Usage - Interior / Exterior Interior
    Usage - Suitable for factories, warehouses, garages and any areas where general chemicals may be spilt
    Usage - Surfaces concrete, wood or metal
    Coverage (sqft per kit) 190-215 sq ft per 1.05 gallon kit depending on how porous concrete is
    Application - Curing Time (hours) Takes light traffic after 12 hours at 60°F
    Application - Recommended Coats One coat is usually sufficient
    How To Apply

    PREPARATION

    Concrete and Brick
    Concrete to be treated must be dry, at least four weeks old and free of any soft surface laitance, contaminants, and not subject to rising damp. All loose material should be removed. Very smooth bare concrete or concrete with soft surface laitance should be etched with Watco Cemtetch and the area thoroughly hosed off and allowed to dry. Grease or oil should be removed with Watco Bio-D (or similar degreaser) and the area thoroughly hosed off and allowed to dry. Very smooth previously painted surface should preferably be abraded to improve adhesion.

    Steel
    Remove loose or flaking material, rust and any previous coatings by wire brushing or disc grinding to achieve a bright surface. Grease or oil should be removed with Watco Bio-D and the metal then washed with water and allowed to dry. Coating should be carried out immediately providing flash rusting has not occurred.



    MIXING

    Pour all of the contents of the 2 inner tins into the large outer tin, taking care to scrape out any excess. Mix the components together very thoroughly using a spatula or similar wide bladed tool (a piece of wooden batten is ideal). Continue mixing until an even color and consistency are obtained. Do not mix more than one unit at a time. If a paint stirrer fitted to an electric drill is used, also use the spatula to blend in any unmixed material from the sides and bottom of the tin.

    APPLICATION

    Epoxicote High Build
    Best results are obtained in warm conditions (minimum 60°F). On horizontal surfaces apply by medium pile type roller (not foam) in one coat. On vertical surfaces 2 thin coats are recommended.
    Reviews
    Request a Quote/Sample
    Delivery

    Home Delivery

    Shipping cost

    Over $1,250.00 FREE
    From $750.00 to $1,249.99 $52.00
    From $400.00 to $745.99 $40.50
    From $200.00 to $399.99 $33.50
    Up to $199.99 $19.50

    © 2017 Watco Industrial Flooring. All Rights Reserved.



    Terms & conditions |  Privacy policy |  Site map |  About us

            


    Problem Solving