Basket (0)

Watco manufactures industrial strength floor paints, repair materials and non slip products


Try our new site

Epoxicote High Build Anti Slip

Epoxicote High Build Anti Slip

$172.20 From

Heavy traffic solution with non-slip in just one coat! Flexible coating resists movement and minor cracks.

Black Mid Blue Mid Green Safety Yellow Silver Gray Tile Red
Add Items to Cart

* Required Fields


There are no price breaks available.

$172.20 From
Product Details
  • Anti-Slip Gloss finish
  • High-build application gives excellent wear resistance
  • Protects the concrete from oil and chemical contamination
  • Non-tainting and virtually solvent-free
  • Easy to clean surface

  • Resistant to: Oil, solvents and harsh cleaning chemicals

    Coverage: Approx. 200 sq ft per kit per coat

    Prop 65

    Epoxicote High Build Anti Slip

    Quick Links

    Technical Data Sheet
    Silver Gray Safety Data Sheet
    Black Safety Data Sheet
    Dark Gray Safety Data Sheet
    Mid Blue Safety Data Sheet
    Mid Green Safety Data Sheet
    Navy Gray Safety Data Sheet
    Safety Yellow Safety Data Sheet
    Tile Red Safety Data Sheet

    Application Video

    Delivery Time (Days) Ships in 24 hours, delivers in 1-3 days
    Max Operational Temp (deg F) 75°F
    How To Apply
    Concrete and Brick- Concrete to be treated must be dry, at least four weeks old and free of any soft surface laitance, contaminants, and not subject to rising damp. All loose material should be removed. Very smooth bare concrete or concrete with soft surface laitance should be etched with Watco Cemtetch® and the area thoroughly hosed off and allowed to dry. Grease or oil should be removed with Watco Bio-D (or similar degreaser) and the area thoroughly hosed off and allowed to dry. Very smooth previously painted surface should preferably be abraded to improve adhesion. Concrete floors on grade must be free of moisture transmission from the ground. If there is any doubt about the dryness of the concrete, conduct a test by simply taping a piece of 4 mil plastic sheet 18” by 18” on the bare concrete for 24 hours. Be sure to tape all four sides. After 24 hours, check the concrete for signs of moisture. The concrete will be darker if damp. If moisture is found, allow additional drying time (10-14 days) and repeat test. Persistent moisture transmission will prevent proper performance of the coating, please contact a Watco Industrial Flooring Expert at (855) 627-6350 for assistance. Also, check for curing compound or other types of sealers by pouring a small amount of water onto the concrete. If water soaks in, the surface is suitable for coating. If water beads up on the concrete, the surface is not porous and a test application is warranted to ensure proper adhesion will develop. Sanding or mechanical abrading may be required if proper adhesion does not develop. See the Technical Data Sheet for more information. Previously coated floors need to be in good sound condition with proper adhesion to the concrete substrate. Check the adhesion of the previous coating by cutting a small X in the coating using a sharp razor knife, firmly apply a piece of 2” duct tape over the center of the X cut, then pull off with a fast snap. The coating is suitable to topcoat if no significant previous coating is removed beyond the X cut. If the coating fails this test, then additional surface preparation is required. It is recommended previously coated floors be sanded and vacuumed prior to application of Epoxicote High Build Anti-Slip. On bare concrete there is a risk of outgassing from small pinholes and voids in the concrete during the curing of the coating which will form outgas bubbles in the finish. To greatly reduce the risk of outgas bubbles we recommend that bare concrete be first primed with either the 4 Hour Epoxy Primer or the Powerfloat Primer. Refer to the primers’ Technical Data Sheets for more information and application instructions. NOTE: Outgassing only occurs when there is a rise in temperature causing air trapped in pinholes to expand. The risk of outgas bubbles can also be reduced by avoiding application of the coating during times of the day where temperatures may increase. Steel- Remove loose or flaking material, rust and any previous coatings by wire brushing or disc grinding to achieve a bright surface. Grease or oil should be removed with Watco Bio-D and the metal then washed with water and allowed to dry. Coating should be carried out immediately providing flash rusting has not occurred.
    Pour all of the contents of the smaller cans into the large outer can, taking care to scrape out any sediment. Mix the components together very thoroughly using a spatula or similar wide bladed tool (a piece of wooden batten is ideal). Continue mixing until an even color and consistency are obtained. Do not mix more than one unit at a time. If a paint stirrer fitted to an electric drill is used, also use the spatula to blend in any unmixed material from the sides and bottom of the can.
    The mixed components must be used immediately. Higher ambient temperatures will reduce the pot life. To extend pot life in higher temperatures the mixed components should be decanted into a shallow tray. Epoxicote Anti-Slip- 30-45 mins. at 60°F.
    Best results are obtained in warm conditions (minimum 60°F). On horizontal surfaces apply by medium pile type roller (not foam) in one coat. On vertical surfaces 2 thin coats are recommended.
    Epoxicote High Build Anti-Slip-The product will cure overnight at 60°F to accept light traffic the next day, and full chemical and water resistance is achieved over 7 days (at a minimum constant temperature of 60°F). Temperatures of 50°F and below will slow down or arrest the curing of the product. Water should not be allowed to lie on the surface for at least 7 days. Avoid washing the floor for 7 days after coating. COVERAGE:
    Approximately 190-215 ft² per 1.05 gal unit per coat. One coat is generally sufficient. CLEAN UP:
    While strong solvent will remove Epoxicote High Build from rollers, it may be more practical to dispose of them. IMPORTANT: Once the contents of the pack have been mixed a chemical reaction takes place which creates heat, and the product should therefore be used immediately. Food products must be removed from the area during application and cure. SAFETY: It is advisable to wear rubber gloves when using the product. Avoid contact with the skin and eyes. If contact occurs with the eyes flush with water and seek medical advice. Material Safety Data Sheets are available on request. See technical data sheet for additional product and application information. FOR PROFESSIONAL USE ONLY.
    Request a Quote/Sample

    Home Delivery

    Shipping cost

    Over $1,250.00 FREE
    From $750.00 to $1,249.99 $52.00
    From $400.00 to $745.99 $40.50
    From $200.00 to $399.99 $33.50
    Up to $199.99 $19.50

    © 2017 Watco Industrial Flooring. All Rights Reserved.

    Terms & conditions |  Privacy policy |  Site map |  About us


    Problem Solving