Basket (0)

Watco manufactures industrial strength floor paints, repair materials and non slip products

Epoxicote High Build Rapid

Epoxicote High Build Rapid

$169.00 From

Chemical resistant gloss floor coating now in the highly requested rapid version. Epoxicote High Build Rapid uses a unique formulation that cuts curing time to a minimum.

Black Mid Blue Mid Green Safety Yellow Silver Gray Tile Red
Add Items to Cart

* Required Fields

VIEW PRICE BREAKS

There are no price breaks available.

$169.00 From
 
Product Details
Our highest performing roller applied floor coating. It will provide a glossy, hygienic and easy to clean surface which is resistant to very heavy wear and a wide range of chemicals. It has been formulated with a ceramic additive which offers excellent abrasion resistance and improved stain protection.

  • Showrooms, warehouses and any heavily trafficked areas where chemicals may be spilled
  • Longer lasting coating in heavy duty areas
  • Improved stain protection and scrub resistance
  • High gloss finish
  • Excellent chemical resistance
  • Low solvent content, virtually odourless
  • 100% solids epoxy resin formula

  • Pendulum Slip Test Values
    Dry PTVWet PTV
     65 Low Slip Potential  55 Low Slip Potential 



    Quick Links

    Technical Data Sheet
    Black Safety Data Sheet
    Dark Gray Safety Data Sheet
    Silver Gray Safety Data Sheet
    Mid Blue Safety Data Sheet
    Mid Green Safety Data Sheet
    Navy Gray Safety Data Sheet
    Safety Yellow Safety Data Sheet
    Stone Safety Data Sheet
    Tile Red Safety Data Sheet
    Specifications
    Delivery Time (Days) Ships in 24 hours, delivers in 1-3 days
    Usage - Interior / Exterior interior
    Usage - Suitable for showrooms, warehouses and any heavily trafficked areas where chemicals may be spilled
    Usage - Properties longer lasting coating in heavy duty areas, improved stain protection and scrub resistance, excellent chemical resistance
    Usage - Surfaces concrete, wood or metal
    Coverage (sqft per kit) 190 sq ft per 1.05 gallon by roller application. Brush application may result in reduced coverage.
    Application - Curing Time (hours) light traffic in 4-6 hours; full chemical and wear resistance is achieved over 7 days (at a minimum constant temperature of 60°F)
    Application - Pot Life (hours) The product has a pot life of one hour maximum at 60°F. Higher temperatures will reduce the pot life.
    Application - Recommended Coats 1
    How To Apply
    Surface Preparation
    Concrete and brick
    Concrete must be dry, at least four weeks old and free of any soft surface laitance, contaminants, and not subject to rising damp. All loose material should be removed. Very smooth bare concrete or concrete with soft surface laitance should be etched with Watco Cemtetch® and the area thoroughly hosed off and allowed to dry. Grease or oil should be removed with Watco Bio-D (or similar degreaser) and the area thoroughly hosed off and allowed to dry. Very smooth previously painted surfaces should preferably be abraded to improve adhesion.
    Steel

    Remove loose or flaking material, rust and any previous coatings by wire brushing or disc grinding to achieve a bright surface. Oil or grease should be removed with Watco Bio-D and the metal then washed with water and allowed to dry. Coating should be carried out immediately providing flash rusting has not occurred.

    Mixing
    Remove the two tins from the tall outer tin. Empty all of the contents of the two tins into the outer tin (scrape around the inside of the tins to remove any residue). Mix the components together very thoroughly using a spatula or similar wide bladed tool (a wooden paint stir stick is ideal). Continue mixing until an even color and consistency are obtained. Do not mix more than one unit at a time. If a paint stirrer fitted to an electric drill is used, also use the spatula to blend in any unmixed material from the sides and bottom of the tin.

    Application
    If appearance is critical we recommend the application of a small trial area first.

    Best results are obtained in warm conditions, (minimum 60°F). On horizontal surfaces apply by medium, pile type roller (not foam) in one coat. On vertical surfaces two thin coats are recommended. The second coat should be applied within 24 hours.
    Reviews
    Request a Quote/Sample
    Delivery

    Home Delivery

    Shipping cost

    Over $1,250.00 FREE
    From $750.00 to $1,249.99 $49.00
    From $400.00 to $749.99 $39.00
    From $100.00 to $399.99 $32.00
    Up to $99.99 $19.50

    © 2017 Watco Industrial Flooring. All Rights Reserved.



    Terms & conditions |  Privacy policy |  Site map |  About us

            


    Problem Solving