Basket (0)

Watco manufactures industrial strength floor paints, repair materials and non slip products

Containment Sealer

Containment Sealer

$262.80 From

Spill containment sealer with a glass reinforced coating and a unique formulation to seal and protect spill containment areas or berms from chemical spills.

Black
Add Items to Cart

* Required Fields

VIEW PRICE BREAKS

There are no price breaks available.

$262.80 From
 
Product Details
Containment Area Sealer is a two-component glass flake reinforced epoxy resin designed to protect secondary containment areas and storage tanks in the event of spillage. This chemical spill containment sealer will protect against spillages of water, oil, diesel and a range of chemicals. Secondary containment coatings can be used to fill cracks between the containment wall and floor, providing a heavy duty chemical resistant coating

Features and Benefits of Containment Area Sealer – Spill Containment Sealer:


  • Unique flexible formulation protects & reinforces containment areas & storage tanks
  • Glass reinforced formula for tough sealing & waterproofing
  • Can be applied to damp surfaces
  • Used for both interior & exterior applications
  • Suitable for concrete, brick, concrete block, metal & asphalt
  • Excellent resistance to gasoline, diesel, acids, alkalis & solvents (see datasheet)
  • Covers approximately 150 sq. ft. per kit. Once coat covers most surfaces
  • Ready for use in 16 to 24 hours @ 60 to 70°F
  • Apply using a Paint Brush or 3" Roller.

  • Quick Tip: You can use Reinforcing Fabric when additional reinforcement is required over cracks and joints. It will waterproof and strengthen vulnerable joints & help prevent the containment area from developing leaks. Apply along the joint where the wall meets the floor, bedding into a wet coating of Containment Area Sealer.

    Quick Links

    Black Safety Data Sheet
    Light Gray Safety Data Sheet
    Technical Data Sheet
    Specifications
    Appearance thick black flexible coating
    Delivery Time (Days) Ships in 24 hours, delivers in 1-3 days
    Primer Required no
    Usage - Interior / Exterior Interior and Exterior
    Usage - Suitable for brick, concrete & concrete block
    Usage - Properties glass reinforced, can be applied to damp surfaces, waterproofs, easy to apply, resistant to gas, diesel, acids, alkalis & solvents
    Usage - Surfaces containment areas & storage tanks
    Coverage (sqft per kit) approximately 150 sq. ft. per kit with one coat
    Application - Curing Time (hours) 16 to 24 hr. @ 60 to 70°F dry to touch, full cure 7 days
    Application - Pot Life (hours) approximately 30 min. @ 70°F
    Application - Recommended Coats one coat normally required; a second coat may be required on very porous surfaces
    Max Application Temperature (deg F) 90°F
    Application - Application Condition dry or damp (not wet), clean, sound & free of contaminants
    Min Application Temperature (deg F) 50°F
    How To Apply
    Surface Preparation: Ensure surfaces are clean, sound and free of contaminants. Large cracks in the surface should be repaired prior to application of Containment Sealer. Remove grease and oil using a solvent free cleaner/degreaser. Containment Sealer can be applied to damp surfaces, although for more permanent installations we recommend that the surface is as dry as possible. Containment Sealer can be applied to painted surfaces but all loose or defective paint must be removed first. Remove loose rust from metal (it is not necessary to remove all well bonded rust).

    Mixing: Please store in a warm room (60-85°F) for at least 8 hours prior to use. The product can become thick and difficult to apply if allowed to become cold. Combine base and activator and mix thoroughly using a paint paddle or spatula to scrape all material from the inside of the containers. Partial mixing is not recommended. Pot life is approximately 30 minutes at 70°F. Higher ambient temperature will shorten pot life.

    Application: Apply by brush, working well into the substrate. The product can be brushed thickly over hairline cracks and joints. One coat is generally sufficient to produce a watertight seal. A second coat may be required on very porous surfaces or to produce a continuous film over rough surfaces.

    Curing Time: The product will be dry to the touch and can be recoated in 16-24 hours. Full cure is achieved over 7 days at an ambient temperature of 60-70°F. Lower temperatures will extend the curing times. Do not apply at temperatures below 50°F.

    Coverage: Approximately 150 sq. ft. per kit.
    Reviews
    Request a Quote/Sample
    Delivery

    Home Delivery

    Shipping cost

    Over $1,250.00 FREE
    From $750.00 to $1,249.99 $49.00
    From $400.00 to $749.99 $39.00
    From $100.00 to $399.99 $32.00
    Up to $99.99 $19.50

    You might also need...

    © 2017 Watco Industrial Flooring. All Rights Reserved.



    Terms & conditions |  Privacy policy |  Site map |  About us

            


    Problem Solving