Basket (0)

Watco manufactures industrial strength floor paints, repair materials and non slip products


Try our new site

Concrex Deep Fill Cold Set

Concrex Deep Fill Cold Set

50lb From $200.35  excl. tax

Fill deep holes in cold conditions and areas with Concrex Deep Fill Cold Cure.

Add Items to Cart
  • Buy 1 for $200.35  excl. tax each
  • Buy 2 for $190.33  excl. tax each and save 5 %
  • Buy 5 for $180.32  excl. tax each and save 10 %
Product Details

Uses - Deep holes in heavily trafficked areas

  • A cold setting version of Watco Concrex Deep Fill Cold Set
  • Apply from 1/2" - 4" thick in one layer
  • Excellent compressive strength
  • Provides excellent chemical resistance and anti slip properties
  • Quicker and more economical than using thinner layers of Concrex Cold Set

  • New formulation contains an extremely hard aggregate allows easier and quicker application in deep layers at cold temperatures. Provides a cost effective foundation before finishing with other Watco Concrex products. Concrex Cold Set Deep Fill is formulated to cure at a temperature range of 32-50°F with the same strength and easy to use formula of Watco Concrex.

    Coverage approx. 5 sq ft per 50 lb kit at 1" thick.

    Prop 65

    Concrex Advanced

    Quick Links

    Technical Data Sheet
    Safety Data Sheet

    Application Video

    Delivery Time (Days) Ships in 24 hours, delivers in 1-3 days
    Usage - Interior / Exterior interior or exterior
    Usage - Suitable for deep repairs at cold temperatures
    Usage - Surfaces concrete, sand and cement, metal
    Max Operational Temp (deg F) 50
    Coverage (sqft per kit) 5 sq ft. per 50 lb kit at 1" thick
    Application - Curing Time (hours) 10 hours at 50°F or 48 hours at 32°F
    How To Apply
    Surface Preparation
    Surfaces should be clean, dry and free of all loose material. Wire brushing or sweeping is generally sufficient.
    Watco Bio-D degreaser can be used to remove grease and oil.


    A primer is not usually required if patch or crack repairing. Watco Tack Coat is recommended when applying Concrex as a thin section screed or when applying to smooth, non-porous or metal surfaces.

    Each pack of Concrex contains aggregate pre-blended with resin and the curing agent. If the entire pack of Concrex cannot be used within 30-60 minutes the products can be part mixed. To split a pack, carefully halve the aggregate/ resin mix (ideally divide it by weight) and use half the number of curing agent bottles or tins. Do not split the contents of a curing agent bottle or tin. Do not mix inside the plastic bucket. Wearing protective gloves, tip the aggregate on to a mixing tray or board. Shake the bottles or tins of curing agent thoroughly until the liquid is a uniform colour. Form the aggregate into a mound and leave a small hole in the middle.

    Empty the curing agent into the hole, ensuring the bottles or tins are completely drained. Carefully mix the aggregate with the curing agent using a trowel until a smooth mortar is obtained, this will take several minutes. The more thorough the mixing, the ‘wetter’, smoother and more manageable the mix becomes. Alternatively, you can knead the mixture by hand, but you must wear suitable gloves. It is important to mix thoroughly until you achieve a consistent color.

    Trowel firmly against the surface to be repaired, and finish with a trowel. To prevent ‘drag’ on the trowel, moisten a rag with mineral spirits and wipe it across the blade which will allow you to create a smooth finish. Concrex Deep Fill Cold Set is normally applied in thicknesses of 1/2"-4", but repairs can be feather-edged for a neat finish, as long as the majority of the repair is at least 1/2" thick. For repairs deeper than 4", apply in separate layers (allow 6-8 hours between layers for curing).
    Request a Quote/Sample

    Home Delivery

    Shipping cost

    Over $1,250.00 FREE
    From $750.00 to $1,249.99 $52.00
    From $400.00 to $745.99 $40.50
    From $200.00 to $399.99 $33.50
    Up to $199.99 $19.50

    You might also need...

    © 2017 Watco Industrial Flooring. All Rights Reserved.

    Terms & conditions |  Privacy policy |  Site map |  About us


    Problem Solving