Basket (0)

Watco manufactures industrial strength floor paints, repair materials and non slip products

Chemi-Coat Cold Cure

Chemi-Coat Cold Cure

$191.90 From

Coating that cures even when it’s cold. Chemi-Coat Cold Cure delivers all the useful features of our standard Chemi-Coat in just one coat, even at freezing temperatures.

Black Mid Blue Mid Green Safety Yellow Silver Gray Tile Red
Add Items to Cart

* Required Fields


There are no price breaks available.

$191.90 From
Product Details

Chemi-Coa Cold Curet® is a one coat tough industrial paint with excellent durability and chemical resistance. It is suitable for a variety of floor surfaces as well as being solvent free and applied at low temperatures. It provides a glossy, hygienic and easily cleaned surface. 

  • Excellent resistance to many chemicals 
  • Suitable for a variety of floor and wall surfaces
  • Solvent free

Chemi-Coat® Cold Cure will cure at temperatures as low as 32°F! It allows refrigeration areas and unheated warehouses to be painted and protected at any time of the year. A single coat is usually sufficient but 2 coats may be required on very porous surfaces.

Ready for heavy traffic after 48 hours at 32°F

Quick Links

Technical Data Sheet
Navy Gray Safety Data Sheet
Mid Green Safety Data Sheet
Mid Blue Safety Data Sheet
Stone Safety Data Sheet
Safety Yellow Safety Data Sheet
Tile Red Safety Data Sheet
Silver Gray Safety Data Sheet
Dark Gray Safety Data Sheet
Black Safety Data Sheet

Application Video

Delivery Time (Days) Ships in 24 hours, delivers in 1-3 days
Usage - Suitable for factories, garages, workshops, showrooms, unheated warehouses, storage rooms, production areas, plant rooms, schools, hospital, cellars, refrigeration areas
Usage - Properties Cures at temperatures as low as 0°C, suitable for all year round application, strong chemical resistance, low solvent content, excellent durability
Usage - Surfaces floors
Max Operational Temp (deg F) 50
Coverage (sqft per kit) 190 sq ft per 1.05 gallon
Application - Curing Time (hours) 24 hours at 50°F and 48 hours at 32°F.
How To Apply
Surface Preparation: Concrete and Brick
Concrete to be treated must be dry, at least four weeks old and free of any soft surface laitance, contaminants, and not subject to rising damp. All loose material should be removed. Very smooth bare concrete or concrete with soft surface laitance should be etched with Watco Cemtetch and the area thoroughly hosed off and allowed to dry. Grease or oil should be removed with Watco Bio-D (or a similar degreaser) and the area thoroughly hosed off and allowed to dry.
Very smooth previously painted surfaces should preferably be abraded to improve adhesion.

Surface Preparation: Steel
Remove loose or flaking material, rust and any previous coatings by wire brushing or disc grinding to achieve a bright surface. Oil or grease should be removed with Watco Bio D and the metal then washed with Water and allowed to dry. Coating should be carried out immediately providing flash rusting has not occurred.

Each Chemi-Coat Cold Cure pack consists of a container of curing agent and a container of resin. The curing agent and resin must be very thoroughly mixed together with a paint mixing blade until an even color is obtained.

Important Once the contents of the pack have been mixed a chemical reaction takes place which causes a rise in temperature and speeds up the curing of the product.

If appearance is critical we recommend the application of a small trial area first.

On horizontal surfaces apply with a medium, pile type roller (not foam) in one coat. On vertical surfaces two thin coats are recommended. The second coat should be applied within 24 hours.
Request a Quote/Sample

Home Delivery

Shipping cost

Over $1,250.00 FREE
From $750.00 to $1,249.99 $49.00
From $400.00 to $749.99 $39.00
From $100.00 to $399.99 $32.00
Up to $99.99 $19.50

© 2017 Watco Industrial Flooring. All Rights Reserved.

Terms & conditions |  Privacy policy |  Site map |  About us


Problem Solving