Basket (0)

Watco manufactures industrial strength floor paints, repair materials and non slip products


Try our new site

Chemi-Coat Anti Slip

Chemi-Coat Anti Slip

$209.40 From

Reduces surface slip for increased safety. Chemi-Coat Anti Slip delivers all the excellent features of standard Chemi-Coat but with coarse aluminium oxide grit for maximum grip wear and resistance.

Black Mid Blue Mid Green Safety Yellow Silver Gray Tile Red
Add Items to Cart

* Required Fields


There are no price breaks available.

$209.40 From
Product Details

Uses: areas where chemical spillage or heavy wear occur.

  • Tough epoxy resin base resistant to many chemicals
  • Hard aluminium oxide grit for maximum wear resistance
  • Low solvent content
  • Superb glossy appearance
  • Easy to apply - aluminium oxide grit is pre-blended into the curing agent, so this is a simple two componant application

    Very porous surfaces should be treated first with Watco 4 Hour Epoxy Primer. For maximum chemical resistance use a base coat of standard Chemi-Coat before the slip resistant coat.

    Coverage approx. 18m² per 4 litre pack maximum allowing for one coat by roller. Brush application may result in reduced coverage. One coat is normally sufficient.
Chemical Resistance
Watco Chemi-Coat Anti Slip is resistant to short-term spillages of the following at 77°F:
Petrol 25% Lactic Acid
Diesel Fuel 10% Hydrochloric Acid
Xylene 10% Nitric Acid
Salt White Spirit
25% Sulphuric Acid 20% Phosphoric Acid
Bleach 10% Citric Acid
20% Ammonia 20% Caustic Soda
Anti Freeze Sugar Solutions
Mineral Oil 10% Oxalic Acid
Detergents 5% Acetic Acid

Methylated Spirits










Discoloration may occur with some chemicals. This is not necessarily an indication of degradation of the coating. For added chemical resistance, particularly to stronger acids, please refer to Watco Chemi-Coat Acid Strength. Please consult our technical department for advice on chemicals not listed.


Prop 65

Chemi-Coat Anti Slip

Quick Links

Application Video

Delivery Time (Days) Ships in 24 hours, delivers in 1-3 days
Usage - Interior / Exterior interior
Usage - Suitable for factories, garages, workshops, warehouses, storage rooms, production areas, loading bays, plant rooms, schools, hospital, cellars
Usage - Properties anti slip surface, excellent resistance to many chemicals, solvent-free, high build epoxy resin, excellent durability
Usage - Surfaces floor
Coverage (sqft per kit) 190²ft per 1.05 gallon pack maximum allowing for one coat by roller. Brush application may result in reduced coverage
Application - Pot Life (hours) 1 at 60°F
Application - Recommended Coats 1
How To Apply

Surface Preparation

Concrete and Brick
Concrete to be treated must be dry, at least four weeks old and free of any soft surface laitance, contaminants, and not subject to rising damp. All loose material should be removed. Very smooth bare concrete or concrete with soft surface laitance should be etched. The area needs to be thoroughly hosed off and allowed to dry. Grease or oil should be removed with Watco Bio-D (or similar degreaser) and the area thoroughly hosed off and allowed to dry. Very smooth previously painted surfaces should preferably be abraded to improve adhesion.

Remove loose or flaking material, rust and any previous coatings by wire brushing or disc grinding to achieve a bright surface. Oil or grease should be removed with Watco Bio-D and the metal then washed with water and allowed to dry. Coating should be carried out immediately providing flash rusting has not occurred.

Each Slip Resistant Chemi-Coat pack consists of a container of curing agent and a container of resin. The curing agent and resin must be very thoroughly mixed together with a wide bladed tool until an even colour is obtained.

Important Once the contents of the pack have been mixed a chemical reaction takes place which causes a rise in temperature and speeds up the curing of the product. The mixed components have a pot life of one hour at 60°F, which reduces at higher ambient temperatures. To extend pot life in higher temperatures the mixed components should be decanted into a shallow tray.

If appearance is critical we recommend the application of a small trial area first.

Best results are obtained in warm conditions, (minimum 60°F). Apply by medium, pile type roller (not foam) in one coat.
Request a Quote/Sample

Home Delivery

Shipping cost

Over $1,250.00 FREE
From $750.00 to $1,249.99 $52.00
From $400.00 to $745.99 $40.50
From $200.00 to $399.99 $33.50
Up to $199.99 $19.50

© 2017 Watco Industrial Flooring. All Rights Reserved.

Terms & conditions |  Privacy policy |  Site map |  About us


Problem Solving