Basket (0)

Watco manufactures industrial strength floor paints, repair materials and non slip products


Try our new site

Barefoot Safety Tape

Barefoot Safety Tape

$30.00 From

Non slip tape ideal for use in wet, slippery areas such as showers, changing rooms, boats and pool surrounds.

Add Items to Cart

* Required Fields


There are no price breaks available.

$30.00 From
Product Details
Thick, soft white PVC tape embossed with a textured pattern to give a non slip surface that will not hurt bare feet, making it the perfect anti slip tape for showers. It is a less coarse texture than our other safety tapes, so it holds less dirt and can be used in food preparation areas. It is also excellent as a non slip tape for pools as well as a non slip tape for boats. To help prevent water penetration under the adhesive in very wet areas, you may also need Safety Tape Edge Sealer.

Features and Benefits of Barefoot Safety Tape - Anti Slip Tape for Wet Areas – Anti Slip Tape for Showers:

  • Ideal for use in wet, slippery areas
  • Improves safety in showers, locker rooms, boats & pool decks
  • Available in 2 sizes: 1" x 60 ft. or 2" x 60 ft.
  • Traffic ready immediately; full cure in 48 hours
  • Can be applied to concrete, wood, metal, tile, terrazzo, & painted or varnished surfaces
  • Use the Safety Tape Primer on dusty concrete, porous, or other weak surfaces to ensure better adhesion

    Samples available upon request

    Quick Links

    Technical Data Sheet
  • Specifications
    Appearance white
    Delivery Time (Days) Standard
    Primer Required No
    Usage - Interior / Exterior interior & exterior
    Usage - Suitable for wet, slippery areas such as showers, locker rooms, boats and pool decks
    Usage - Properties anti slip, will not hurt bare feet, easy to apply, self adhesive
    Usage - Surfaces floor, steps
    Application - Curing Time (hours) full cure: 48 hours
    Application - Application Condition clean & dry
    Min Application Temperature (deg F) 50
    How To Apply
    Surface preparation: Wash the area to remove any grease, oil, dirt, or other contaminates, rinse and allow to dry. The Safety Tape can be applied to any smooth surface such as concrete, wood, metal, tile, terrazzo, and painted or varnished surfaces. Use the Safety Tape Primer on dusty concrete, porous, or other weak surfaces to ensure better adhesion.

    Application: Apply only when air and surface temperature are above 50°F (10°C). The surface area must be clean and dry at the time of application. On stair trends and landings, apply the Safety Tape at least 3/8” back from the edge to avoid edge curl. When applying a strip of Safety Tape, do not peel off entire backing all at once. Rather, peel back about 2” from the end of the strip to expose the adhesive and position in place. Press down firmly, then remove the remainder of backing from the Safety Tape while affixing it to the surface. Avoid stretching the tape when placing it into position. The Safety Tape may be peeled back up to reposition it if necessary, but try to avoid repeating this action. Once in place, firmly press down on the Safety Tape by hand or with your foot to secure it. The Safety Tape is suitable to support light foot traffic immediately, however it requires 24 hours for the adhesive to achieve full cure.
    Request a Quote/Sample

    Home Delivery

    Shipping cost

    Over $1,250.00 FREE
    From $750.00 to $1,249.99 $52.00
    From $400.00 to $745.99 $40.50
    From $200.00 to $399.99 $33.50
    Up to $199.99 $19.50

    © 2017 Watco Industrial Flooring. All Rights Reserved.

    Terms & conditions |  Privacy policy |  Site map |  About us


    Problem Solving