Product Detail
Watco Asphalt Resurfacer seals and resurfaces damaged and worn asphalt. It forms a flexible, sealed, waterproof surface that transforms old asphalt and tarmac.
- Easy paint roller or paint brush application
- Matte, slip-resistant surface
- No primer required
- Non-hazardous and low odor acrylic formula
- Flexible system to cope with natural movements in the asphalt
- Excellent adhesion and covering power
- Quick drying (24 hours for light traffic)
- Excellent resistance to UV and weathering
- Can be applied at 1mm to 2mm in one layer, several layers, can be applied to cover badly worn patches
- Suitable for pedestrian and light-medium traffic (cars, not forklifts)
- Available in Black, Tile Red, Mid Green and Dark Gray
- Coverage approx. 160 sq ft at 40mil thick
Specifications
| Usage Interior/Exterorior: | Exterior |
| Coverage: | Approx. 160 sq ft at 40mil thick |
| Curing Time (Hours): | Protect from rain for 6 to 12 hours following application. Touch dry /Light traffic: 24 hours at 50 - 60°F, 15 - 20 hours at 60 - 85°F Heavy traffic: 2 - 3 days at 50 - 60°F, 2 days at 60 - 85°F |
| Suitable for: | Asphalt and tarmac |
How to Apply
Preparation
Watco Asphalt Resurfacer is flexible to allow for some movement in asphalt surfaces. Ensure surfaces are clean and free of loose material by brushing with a stiff broom and clean water. Allow to become dry, or almost dry, before applying the Asphalt Resurfacer. If the surface has been previously painted, remove as much paint as possible by mechanical means. Any remaining paint should be well bonded and lightly abraded to provide a key.
Watco Bio-D Floor Degreaser & Cleaner, a bio-degradable water based degreaser, can be used for grease removal from concrete and asphalt. Watco Asphalt Resurfacer can be applied to a damp, but not wet, substrate. Damp down porous surfaces (but do not leave standing water) before application.
Mixing
Stir the contents well with a wide bladed mixing tool to ensure that the product has not settled in transit.
Application
Apply only in dry conditions (above 10°C and below 35°C). Do not apply in cold, damp conditions or when rain is forecast. In warmer conditions 25°C-35°C dry, hot surfaces should be slightly dampened first. Pour onto the surface and spread in one direction using a squeegee or roller to achieve a smooth finish. Alternatively, it can be overrollered with a textured roller to create an anti-slip finish. Do not apply the product in layers thicker than 2 mm. Never add water to the product.
Data Sheet
Watco Asphalt Resurfacer seals and resurfaces damaged and worn asphalt. It forms a flexible, sealed, waterproof surface that transforms old asphalt and tarmac.
- Easy paint roller or paint brush application
- Matte, slip-resistant surface
- No primer required
- Non-hazardous and low odor acrylic formula
- Flexible system to cope with natural movements in the asphalt
- Excellent adhesion and covering power
- Quick drying (24 hours for light traffic)
- Excellent resistance to UV and weathering
- Can be applied at 1mm to 2mm in one layer, several layers, can be applied to cover badly worn patches
- Suitable for pedestrian and light-medium traffic (cars, not forklifts)
- Available in Black, Tile Red, Mid Green and Dark Gray
- Coverage approx. 160 sq ft at 40mil thick
| Usage Interior/Exterorior: | Exterior |
| Coverage: | Approx. 160 sq ft at 40mil thick |
| Curing Time (Hours): | Protect from rain for 6 to 12 hours following application. Touch dry /Light traffic: 24 hours at 50 - 60°F, 15 - 20 hours at 60 - 85°F Heavy traffic: 2 - 3 days at 50 - 60°F, 2 days at 60 - 85°F |
| Suitable for: | Asphalt and tarmac |
Preparation
Watco Asphalt Resurfacer is flexible to allow for some movement in asphalt surfaces. Ensure surfaces are clean and free of loose material by brushing with a stiff broom and clean water. Allow to become dry, or almost dry, before applying the Asphalt Resurfacer. If the surface has been previously painted, remove as much paint as possible by mechanical means. Any remaining paint should be well bonded and lightly abraded to provide a key.
Watco Bio-D Floor Degreaser & Cleaner, a bio-degradable water based degreaser, can be used for grease removal from concrete and asphalt. Watco Asphalt Resurfacer can be applied to a damp, but not wet, substrate. Damp down porous surfaces (but do not leave standing water) before application.
Mixing
Stir the contents well with a wide bladed mixing tool to ensure that the product has not settled in transit.
Application
Apply only in dry conditions (above 10°C and below 35°C). Do not apply in cold, damp conditions or when rain is forecast. In warmer conditions 25°C-35°C dry, hot surfaces should be slightly dampened first. Pour onto the surface and spread in one direction using a squeegee or roller to achieve a smooth finish. Alternatively, it can be overrollered with a textured roller to create an anti-slip finish. Do not apply the product in layers thicker than 2 mm. Never add water to the product.
