Basket (0)

Watco manufactures industrial strength floor paints, repair materials and non slip products

 

Try our new site

Asphalt Crack Filler

Asphalt Crack Filler

1 gallon From $37.90  excl. tax

Polymer modified, flexible crack filler to prevent water damage and erosion on cracked asphalt or tarmac surfaces.

Add Items to Cart
VIEW PRICE BREAKS
  • Buy 1 for $37.90  excl. tax each
  • Buy 4 for $34.11  excl. tax each and save 10 %
 
Product Details
Asphalt Crack Filler is a polymer modified flexible crack filler to seal out water damage and erosion on cracked asphalt. Unsightly cracks in asphalt can lead to water seepage, erosion and accelerated deterioration of the surface. This rubberized product makes crack repairs easy. Use on interior and exterior asphalt, tarmac and concrete.

Features and Benefits of Asphalt Crack Filler – Asphalt Repair:


  • Seal out water damage and erosion on cracked asphalt
  • Flexible to allow for expansion and movement
  • Long lasting protection
  • Can be top coated with Asphalt Paint if necessary
  • Excellent adhesion
  • One gallon fills a crack approximately 250 linear feet at 1/4" wide
  • Cracks 1/8 to 1" can be filled by mixing Asphalt Crack Filler with sand additive

    Quick Links

    Safety Data Sheet_Asphalt Crack Filler_A010001
    Technical Data Sheet
  • Specifications
    Appearance flexible, black asphalt
    Delivery Time (Days) Standard
    Primer Required no
    Usage - Interior / Exterior interior & exterior
    Usage - Suitable for asphalt & concrete
    Usage - Properties flexible, long lasting, protects against ingress of water, can be overcoated, excellent adhesion
    Usage - Surfaces floors
    Application - Curing Time (hours) approximately 2-4 hours for cracks up to 1/4" wide, 6-10 hours for cracks up to 1" wide at 60-70°F
    Application - Coverage UOM approximately 250 linear feet of a 1/4" wide crack
    Max Application Temperature (deg F) 90
    Application - Application Condition crack should be reasonably dry, although a little dampness may be tolerated
    Min Application Temperature (deg F) 40
    How To Apply
    Surface Preparation: Sweep or scrape out loose debris from the crack.

    Mixing: Stir well before use.

    Application: Do not use in wet conditions or if air and surface temperatures are below 40°F. Damp or cold weather will delay the drying time. The crack should be reasonably dry, although a little dampness may be tolerated.

    Cracks up to 1/8" wide: Pour the Asphalt Crack Filler into the cracks using a spouted can or a watering can. Any excess material that flows over the edge of the crack may be brushed to a thin film. Once the Asphalt Crack Filler has dried, dust it with very fine sand or cement to remove any residual tack.

    Cracks 1/8 to 1" wide: Prime the sides of the crack with a brush coat of Asphalt Crack Filler. Mix Asphalt Crack Filler with our sand additive or damp sand to produce a slightly stiff mortar. Trowel into the crack and smooth off. Once the mortar is dry, dust with very fine sand or cement to remove any residual tack.

    Drying Time: Dry time varies widely depending upon weather conditions and size of crack. Dry, warm conditions will accelerate drying. The product sets by evaporation of water. Damp, cold conditions will therefore delay drying. As a guide, approximately 2-4 hours should be allowed for cracks up to 1/4" wide and 6-10 hours for cracks up to 1" wide at 60-70°F.
    Reviews
    Request a Quote/Sample
    Delivery

    Home Delivery

    Shipping cost

    Over $1,250.00 FREE
    From $750.00 to $1,249.99 $52.00
    From $400.00 to $745.99 $40.50
    From $200.00 to $399.99 $33.50
    Up to $199.99 $19.50

    You might also need...

    © 2017 Watco Industrial Flooring. All Rights Reserved.



    Terms & conditions |  Privacy policy |  Site map |  About us

            


    Problem Solving